Fabricant chinois de portes de douche pour projets, de gros, et assistance OEM.
KJbath
Assistance aux projets de portes de douche et de salles de bains directement en usine.
Shower screens engineered for the whole journey — 8mm/10mm EN12150-1 tempered glass, ISTA drop-tested packaging that survives courier networks, and hardware salt-spray tested for 96 heures. Lower breakage. Higher margin. Fewer callbacks.
“Their zone-packaging saved our contractors days of sorting on-site.” — Ethan, Project Developer
Selling glass online is risky — unless you partner with the right factory. Industry data puts the spontaneous breakage rate of tempered shower glass at roughly 0.3%, and most avoidable losses happen not in the bathroom but in transit. As a manufacturer of custom shower screens, we have engineered our supply chain around the three numbers that decide your profit: breakage rate, compliance, and MOQ.
No more anxiety over courier handling. Every panel is secured in honeycomb-reinforced cartons with high-density EPS edge protectors and custom-molded foam, validated by 1.5-meter drop tests on corners, edges and faces following ISTA parcel-delivery logic. Ton parois de douche sans cadre arrive intact — and your review score stays intact too.
Learn About Our Drop Test StandardsWe temper every panel at approximately 600°C and quench it to reach 4-5x the bending strength of float glass. Fragmentation is verified against EN12150-1 with a minimum of 40 particules par 50x50mm, and our heat-soak-informed QC keeps spontaneous breakage below 0.3%. Documentation for CE, SGCC / ANSI Z97.1 and AS/NZS 2208 can be prepared for applicable markets. Optional Easy-Clean nano-coating available.
Request Glass SpecificationsTest the market without tying up cash flow. Standard MOQ starts at just 10-20 ensembles par modèle, and you can mix sizes, glass options and finishes in one 20ft container — ideal for Amazon trial orders and regional distributors building their first assortment.
Any factory can say “high quality.” Few can show you the tolerances. Here is exactly how our parois de douche are built, from raw float glass to the finished panel.
Need a different size, radius corner or drilled hole pattern? All parameters below are customizable through our drawing-review workflow.
| Paramètre | Spécification |
|---|---|
| Épaisseur du verre | 6millimètre / 8millimètre / 10millimètre / 12mm trempé (8millimètre & 10mm standard for frameless) |
| Glass standards | CE EN12150-1, SGCC / ANSI Z97.1, AS/NZS 2208, CCC GB15763.2 |
| Fragmentation | ≥40 particules par 50x50mm (EN12150-1) |
| Spontaneous breakage rate | < 0.3% |
| Size tolerance | ±0.5mm panel; water-jet cutouts 0/+1mm |
| Max panel size | Jusqu'à 2440 x 3660mm (project-dependent) |
| Edge work | Flat polished, ~1mm chamfer, safety corners |
| Matériel | 304 acier inoxydable (316 optional); Chrome / Noir mat / Or brossé / Nickel brossé / Gunmetal |
| Salt-spray resistance | Up to 96h, OIN 9227 neutral salt spray, no corrosion |
| Sealing | PVC water-seal strips, magnetic seals, silicone gaskets |
| Coating options | Easy-Clean hydrophobic nano-coating, safety film |
| Emballage | Carton nid d'abeille + EPS edge protection (e-commerce) / plywood crate (project) |
| Quantité minimale de commande | 10-20 ensembles par modèle; mixed loading in 20ft/40ft container |
| Délai de mise en œuvre | 15-25 days standard; 25-35 days custom with holes/cutouts |
From industrial chic to modern luxury, our parois de douche matrix is designed to fly off your shelves — and each series targets a different buyer segment and price point.
| JL712 Ultra-Minimalist (Sans cadre) | JP0206 Industrial Grid | Semi-Frameless Series | |
|---|---|---|---|
| Verre | 8millimètre / 10mm trempé | 6millimètre / 8mm trempé | 5millimètre / 6mm trempé |
| Matériel | 304 SS clamps & support bar | Noir mat 304 SS framed grid | Aluminum alloy profiles |
| Look | Fully frameless, maximum transparency | Bold black grid lines, industrial chic | Slim frame, budget-friendly |
| Mieux pour | Hôtels de charme, modern apartments, premium e-commerce | Trend-focused brands, loft & projets d'accueil | Budget hotels, large apartment programs, DIY retail |
| Install difficulty | Moyen (needs plumb walls) | Moyen | Faible (frame forgives wall imperfections) |
| Price position | Prime | Mid-premium | Value |
Completely frameless fixed paroi de douche à l'italienne panels — the ultimate best-seller for modern apartment renovations and contemporary retail.
Bold matte black profiles; a high-demand aesthetic for boutique hotels and trend-focused e-commerce brands.
Slim-frame, budget-friendly panels for large apartment programs and DIY retail. Custom finishes: Chrome poli, Matte Black and Brushed Gold hardware, all 96-hour salt-spray tested.
Quality control here is a workflow you can audit, not a slogan. Every paroi de douche order passes five documented checkpoints:
Raw float glass from first-tier brands (Xinyi, CSG, Jinjing class) is checked for flatness, nickel-sulfide inclusions and surface defects before cutting; hardware lots are verified against finish samples.
CNC cutting, edge polishing and drilling are measured against approved drawings — ±0.5mm panel tolerance and 0/+1mm cutout tolerance are recorded, not assumed.
Fragmentation tests confirm ≥40 particules par 50x50mm (EN12150-1); surface stress and bow (≤1.5‰) are sampled per batch to hold the spontaneous breakage rate below 0.3%.
Verre, hardware kits, seals and instructions are dry-matched per order so nothing is missing when the carton opens on site.
Drop-test-validated packaging, label verification, and container loading photos sent to the buyer before departure. Third-party inspection (SGS/TUV/BV) can be coordinated at your request.
Whether you are building a private-label line or specifying 300 bathrooms for an apartment tower, the workflow is the same: clear drawings, approved samples, controlled production.
Buyers trust numbers; specifiers trust references. Two recent programs that show what the workflow above delivers:
A multi-storey beachfront development needed hardware that would survive salt-laden air. We supplied 304 stainless steel systems with surface treatment verified by salt-spray testing, paired with Smart Zone Packaging labeled floor by floor. The local contractor reported zero missing-part delays, and the anti-corrosion finish remains stable in the coastal climate.
“Their zone-packaging saved our contractors days of sorting on-site.” Ethan, Project DeveloperRead the Australia Case Study
An Amazon-category seller switched to our ISTA-validated e-commerce packaging (honeycomb carton + PSE moulé) for their paroi de douche à l'italienne line, with mixed-SKU container loading and 10-20 set trial MOQs. Result: transit breakage claims dropped below their 2% profitability threshold, and the line moved from quarterly trial orders to standing monthly replenishment.
For project buyers, labor is the hidden cost. Our screens are engineered to be installer-friendly:
Eight questions importers, developers and OEM brands ask before the first order — glass thickness, water containment, certifications, Quantité minimale de commande, private label, conditionnement, lead times and hardware durability.
Pour le développeur / Specifier6mm is reserved for framed panels, vanity screens and light-duty use; 8mm is the export standard for walk-in panels up to 2000mm high; 10mm is specified for floor-to-ceiling or oversized panels and five-star hotel suites where extra rigidity and a premium feel matter. 8mm accounts for the majority of our screen volume, with 10mm the fastest-growing spec in luxury projects.
Pour l'architecte / DesignerA frameless screen is a splash barrier, not a sealed enclosure: it works together with a linear drain, correct floor fall and a 30-50mm glass-to-wall overlap. We add transparent PVC water-seal strips, magnetic seals and an optional bottom sweep or threshold deflector, which keeps the wet zone contained in typical residential and hotel layouts without a full frame.
For the Compliance-Focused ImporterVerre de marché CE deux FR 12150-1 pour l'Europe, SGCC-certified glass meeting ANSI Z97.1 / CPSC 16 CFR 1201 for North America, et AS/NZS 2208 documentation for Australia and New Zealand. Fragmentation is verified at a minimum of 40 particles per 50x50mm and heat-soak-informed QC keeps spontaneous breakage below 0.3%; certificates and test reports ship with the order documentation pack.
Pour l'importateurLe MOQ standard est 10-20 ensembles par modèle. Tailles, glass textures (clair, ultra-clair à faible teneur en fer, fluted, givré) and hardware finishes can be mixed in a single 20ft container, so you test several price points without tying up cash flow.
Pour le propriétaire de la marque OEMOui – logos gravés au laser ou imprimés sur le verre et la quincaillerie, cartons et manuels de marque privée, et outils personnalisés protégés par NDA. OEM programs start from the standard MOQ, with sample approval required before mass production.
For the E-commerce RetailerEvery panel ships in multi-layer honeycomb cardboard with high-density EPS edge protectors and custom foam molding, validated by 1.5-meter drop tests to ISTA parcel-delivery logic. Breakage through courier networks stays below 0.5%, and verified transit damage is replaced free in your next shipment.
For the Retail BuyerSamples ship in 7-12 days by express. Standard models leave the factory in 15-25 days after order confirmation; custom glass with drilled holes or cutouts needs 25-35 days including drawing approval, et les photos de chargement sont partagées avant la fermeture du conteneur.
Pour le développeur de projetCharnières, brackets and stabilizers are 304 stainless steel or brass with PVD finish, passing up to 96 hours of ISO 9227 neutral salt spray testing with no corrosion. For coastal projects we recommend the PVD hardware line proven on Australian seaside apartments.
Tell us your target market, channel and volume plan. Nous vous répondrons dans 24 hours with pricing, MOQ options and a packaging/spec sheet matched to your channel — e-commerce parcel, wholesale distribution, or project delivery.
Route n°1 de Kexue, ZoneB, Parc industriel de Shishan, Nanhai, Foshan, Guangdong, Chine
Envoyez votre brief de projet via le formulaire CF7 en direct ci-dessous. Vous pouvez inclure des dimensions, dessins, objectifs de quantité, et toutes les références de fichiers dans une seule soumission.
