Commercial Projects · Drawing Review to Batch Delivery

Commercial Glass Doors & Shower Systems for Building Projects

Q: Can you review our CAD drawings before we place an order?

Yes. We support pre-production drawing review so dimensional conflicts, opening logic, and other avoidable installation problems can be identified before mass production begins.

Q: Are you only a factory, or can you also support OEM and wholesale supply?

We do both. As a shower door manufacturer, we support project delivery as well as OEM and wholesale-oriented cooperation for buyers who need product-line expansion.

Q: Can your glass doors and hardware withstand high-frequency use in commercial buildings?

Yes. Commercial entry and shower systems face far more open/close cycles than residential use. Our sliding hardware is validated through 100,000-cycle push/pull testing, and we use 304 stainless steel hardware for corrosion resistance and long-term durability in high-traffic commercial environments.

Q: What certifications and glass standards do you provide for commercial projects?

We support SGCC (Safety Glazing Certification Council, North America) and CE (European Union) certification documentation, with tempered glass meeting ANSI Z97.1 (US), EN 12150 (Europe), and AS/NZS 2208 (Australia) standards. Each order ships with a QC report and certificate copies for project review and customs clearance.

From drawing review to batch production, we help developers, appaltatori, and procurement teams deliver commercial glass doors and shower systems with less rework and stronger compliance – sostenuto da 25+ anni of project supply experience, 100,000-cycle tested hardware, and exports to 190+ Paesi.

Submit Project Drawings

Commercial building interior with frameless glass shower door and marble bathroom finishes

★★★★★

“La sanità non ha fornito solo porte e finestre – they helped us control the most error-prone custom aspects of our office building project before they became problems.” – Giuseppe Mrema, Tanzania Office Building Project

25+ anni Project Supply Experience Since 1999

15,000㎡ Own Factory Behind Batch Orders

1,000 sets/mo Flexible Monthly Production Capacity

100,000 cicli Sliding Hardware Durability Tested

Rischio & Risoluzione

Why Commercial Glazing Fails – and How We Control It

Office and public-building glazing faces higher traffic, tighter tolerances, and more varied functional demands than residential work. These are the three failure points buyers actually encounter – engineered out before production.

Rischio 01 – Durabilità

Il rischio

High-frequency use wears hardware fast

Commercial doors are opened far more often than residential ones – weak rollers and fittings fail within months under repeated traffic.

Come lo rimuoviamo

100,000-cycle hardware, 304 stainless

Sliding hardware validated through 100,000-cycle push/pull testing, con 304 ferramenta in acciaio inossidabile for corrosion resistance in high-traffic environments – proven on a ~150-set office building program.

100,000-Cycle Tested304 Stainless Hardware

Rischio 02 – Precisione

Il rischio

Dimensional drift across many openings

Commercial projects carry dozens of non-standard openings. Small drift across a batch becomes expensive on-site rework.

Come lo rimuoviamo

Drawing review + CNC precision cutting

We review and deepen project drawings before production, then hold every unit to tolerance with CNC precision cutting and machining – the numerically controlled equipment that made the 150th door of the Tanzania program fit like the 1st.

Revisione del disegnoCNC Precision CuttingBatch Tolerance

Rischio 03 – Zoning

Il rischio

Un edificio, many zone requirements

Openness in work areas, privacy and acoustics in meeting rooms, facade-matched exterior windows – a single generic spec cannot serve them all.

Come lo rimuoviamo

Zone-by-zone glazing schemes

We tailor glazing by zone: clear glass for open office areas, privacy and acoustic treatment for meeting rooms, and exterior windows matched to the building elevation – then pack by floor and zone so installation runs in sequence.

Open-Office ClarityMeeting-Room PrivacyFacade-Matched Windows

Drawing Review to Batch Delivery – One Accountable Chain

Our commercial workflow is built around the real pressures of developers, appaltatori, and procurement teams: engineering support, manufacturing control, and documented delivery in one process.

Drawing deepening & revisione

Dimensioni, opening logic, and structural fit checked before mass production – avoidable conflicts caught in the file, not on site.

Full in-house manufacturing chain

Aluminum machining, glass deep-processing, assembly, and automated packaging under one 15,000㎡ roof, con 1,000 set di capacità flessibile mensile.

Pavimento & zone numbered packaging

Every unit labeled by floor and zone in honeycomb cartons with reinforced wood crates – delivery logic that supports your installation schedule.

Per-order documentation

Structural drawings, hardware configuration, illustrated installation manual, Rapporto di controllo di qualità (tempering/impact/salt-spray), SGCC/CE certificate copies, and a spare-parts kit with every order.

Sliding glass shower door system for commercial and hospitality bathrooms

High-Traffic Entries

Sliding Glass Doors

Commercial entry and partition doors with 100,000-cycle tested rollers and 304 ferramenta in acciaio inossidabile.

Visualizza intervallo

Frameless walk-in shower screen panel with clear tempered glass in a contemporary bathroom

Open Zones & Lobbies

Glass Screens & Partizioni

Frameless glass screens for office zones, lobbies, and wet areas – clear sightlines with stable, compliant fixing.

Visualizza intervallo

Project-grade shower enclosure cabin with tempered glass for commercial washrooms

Washrooms & Ospitalità

Shower Enclosure Systems

Project-grade enclosures with SGCC/CE compliant tempered glass for commercial washrooms and hospitality areas.

Visualizza intervallo

Conformità organizzata per mercato, Dimostrato dal test

Commercial buyers need documented proof, not promises. Certification documentation is prepared per destination market so glass and hardware clear project review and customs without surprises.

America del Nord

SGCC + ANSI Z97.1

SGCC (Consiglio per la certificazione dei vetri di sicurezza) vetro temperato certificato, in linea con lo standard per vetri di sicurezza ANSI Z97.1 a cui fanno riferimento gli ispettori statunitensi e canadesi.

Europa

CE + IN 12150

Vetro temperato con marchio CE prodotto secondo EN 12150, con documentazione di conformità pronta per la consegna del progetto.

Australia / Nuova Zelanda

AS/NZS 2208

Programmi per il vetro allineati con AS/NZS 2208 per i requisiti del codice edilizio australiano e neozelandese.

Sistemi di gestione

ISO 9001 · 14001 · 45001

Qualità, ambientale, e salute sul lavoro & gestione della sicurezza certificata tra i nostri 15.000㎡ facilità.

SGCC Safety Glazing Certification Council mark

CE European Union safety certification mark

AS/NZS 2208 Australian and New Zealand glass standard mark

ISO 9001 quality management system certification

100,000 cicli Resistenza push-pull del rullo

96H / 240H Prova di corrosione in nebbia salina

5 test Regime di controllo qualità interno per lotto

3 sistemi ISO 9001 · 14001 · 45001

1 pacchetto Rapporto di controllo di qualità + certificati per ordine

How Commercial Projects Move

Dalla richiesta al post-vendita secondo un ritmo prevedibile

Commercial buyers need schedule certainty. Here is the cooperation workflow we run on every project, with the lead times we commit to.

1 12H

Inquiry & Drawing Intake

Invia disegni, target quantity, destination market, and finish requirements – answered within 12 ore with a project-oriented review, not a generic quote.

2 Pre-cut

Progetto & Structural Confirmation

Engineers deepen the drawings, confirm hardware configuration and zone-by-zone requirements before sampling.

3 15 giorni

Sample Production

Approved drawings move to sampling in 15 giorni – verify fit, fine, and hardware feel before volume.

4 30 giorni

Produzione di massa

First bulk order in 30 giorni; riordina dentro 20-25 days because tooling and production records are retained for your account.

5 5 test

Controllo qualità & Certificazione

Temperamento, impatto, caduta dell'imballaggio, nebbia salina, and roller testing – with a QC report and SGCC/CE certificate copies for your review.

6 By zone

Confezione & Logistica

Packed by floor and zone in honeycomb cartons with reinforced wood crates, container-loaded to match your site sequence.

After-Sales Commitment 5-year warranty on shower doors, 3-year warranty on hardware, supporto tecnico online a vita. Pagamento: 30% depositare + 70% saldo dopo l'ispezione pre-imbarco.

A ~150-Set Program, Delivered in Sequence

The Dar es Salaam program shows the full commercial playbook: drawing review first, zone-by-zone engineering, and packaging that follows the installation schedule.

Custom glass office doors installed in the Dar es Salaam office building project, Tanzania

CommercialeDar es SalaamGiugno 2025~150 Sets

Edificio per uffici di Dar es Salaam – ~150 Custom Sets

In giro 150 sets of office glass doors plus exterior windows. Drawing review completed before production; a zone scheme delivered – clear glass for open office areas, privacy and acoustic treatment for meeting rooms, facade-matched exterior windows – with every unit packed by floor and zone numbering.

“La sanità non si limitava a fornire prodotti per porte e finestre – they helped us control the most error-prone custom parts of our office project in advance.”
Giuseppe Mrema – Dar es Salaam Office Building Project

Read the Tanzania case study

190+Paesi serviti

11Brand partners

1,000Imposta / month capacity

See How We Run Multi-Set Programs

Browse the full project gallery – named clients, unit counts, and the drawing-review, zoning, and packaging logic behind each delivery.

Explore all projects

Brands Behind Our Commercial Track Record

Our glass door and shower systems are specified across hotel, appartamento, and commercial programs for internationally recognized brands.

Nomi di marchi mostrati con il permesso del cliente.

Domande frequenti

Domande frequenti per Commercial Project Buyers

Six questions commercial project buyers ask most often – covering CAD review, consistenza del lotto, OEM and wholesale supply, high-frequency durability, certifications, and how to start a project. Tocca una domanda per leggere la nostra risposta standard.

Can you review our CAD drawings before we place an order?

For the Architect & Project BuyerSÌ. We support pre-production drawing review so dimensional conflicts, opening logic, and other avoidable installation problems can be identified before mass production begins.

How do you maintain consistency across large-volume project orders?

For the Procurement ManagerConsistency comes from process control. We standardize the glass, hardware, finishing, and production records so the project batch performs as one coordinated package, not as scattered units.

Are you only a factory, or can you also support OEM and wholesale supply?

For the Channel BuyerWe do both. As a produttore di porte per doccia, we support project delivery as well as OEM and wholesale-oriented cooperation for buyers who need product-line expansion.

What should we send first to start a commercial project discussion?

For the New BuyerThe fastest way is to send your drawings, target quantity, market, and any special material or finish requirements. That allows us to respond with a more useful project conversation instead of a generic quote.

Can your glass doors and hardware withstand high-frequency use in commercial buildings?

Per l'ingegnere di progettoSÌ. Commercial entry and shower systems face far more open/close cycles than residential use. Our sliding hardware is validated through 100,000-cycle push/pull testing, and we use 304 ferramenta in acciaio inossidabile for corrosion resistance and long-term durability in high-traffic commercial environments.

What certifications and glass standards do you provide for commercial projects?

For the Procurement ManagerSosteniamo SGCC (Consiglio per la certificazione dei vetri di sicurezza, America del Nord) E CE (European Union) certification documentation, with tempered glass meeting ANSI Z97.1 (NOI), IN 12150 (Europa), E AS/NZS 2208 (Australia) standards. Each order ships with a QC report and certificate copies for project review and customs clearance.

Torna all'inizio

Hai bisogno di un preventivo veloce? Chatta con il nostro team di esportazione su WhatsApp.